-
38 -
Item
Description
environments are required, you can
also set the additional profiles to
eliminate the configuration time. To
save the current parameters, highlight
the Profile field, type a new name,
and click on the
Apply
button.
Network
Name
A specific name shared among
connected Wireless PC, Access Points
and other wireless stations on the
wireless network. The name must be
identical for all devices and points
attempting to connect to the same
network. The default name is
ANY
.
To change the Network Name, simply
enter a new name in the field.
Network
Type
It displays the type of BSS.
Access Point:
allows the Adapter to
communicate with a wired network
which employing an Access Point.
Peer-to-Peer:
allows PC-to-PC,
station-to-station communication
without employing an Access Point.
(
Note:
For the detailed illustration
about Access Point and Peer-to-Peer
modes, please refer to the
Wireless
Network Options
section.)
Peer-to-Peer
Channel
To communicate with other Wireless
PC, you must specify the same
channel. Click the up and down arrow
at the right of the Peer-to-Peer
Channel to set the desired channel.
The field is grayed out in Access
Point mode.
Transmit
Rate
It displays the current transmit rate.
1Mb, 2Mb, Auto 1 or 2 Mb, 5.5Mb,
11Mb or Fully Automatic
)
Defaults
Clicks the button to restore to the
default settings.
OK
Click
OK
to save your changes.
Cancel
Click
Cancel
to ignore the previous
setting.
Apply
Click
Apply
to activate the settings.
