7
Installation
Installation of the 4-Port 10/100Mbps Ethernet Switch Card requires
hardware installation first, then software installation.
Unpack and Inspect
Open the shipping cartons and carefully remove all items. In addition
to this User's Guide, ascertain that you have:
•
One 4-Port 10/100Mbps NWay Ethernet Switch Card
•
Software Diskette
•
User’s Manual
Install the Adapter
1. Shut down the computer, unplug its power cord, and remove the
chassis cover.
2. If your order does not include the Boot ROM option, go ahead to
Step 3. If your order includes the Boot ROM option, then install
the Boot ROM Chip by plugging the chip into the Boot ROM
Socket on the 4-Port 10/100Mbps NWay Ethernet Switch Card.
The notched end of the Boot ROM Chip must be aligned with the
notched end of the Boot ROM Socket (opposite alignment will
cause destruction of the Boot ROM Chip).
Summary of Contents for TE100-S4PCI
Page 1: ...TE100 S4PCI 4 Port 10 100M NWay Ethernet Switch Card User s Guide...
Page 4: ......
Page 14: ......
