24
uplink (MDI-II) port to any port of the Hub.
B. Using crossover cable
When using crossover cable, the connection can be made from any
regular ports of the Switch to any port of the Hub.
Switch to Switch (other devices)
The Switch can be connected to another switch or other devices
(routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP
straight or crossov er cable.
Note: Use CAT5 (or better) cable for
100Mbps connection.
A. Using straight cable
When using straight cable, this is done from the Switch’s uplink
(MDI-II) port (Switch A) to any of the 10Mbps or 100Mbps (MDI-X)
port of the other switch (switch B) or other device.
B. Using crossover cable
When using crossover cable, this is done from any
(MDI-X) port of
the Switch (Switch A) to any of the 10Mbps, 100Mbps (MDI -X) port
of the other switch (switch B) or other device.
1.
The “LINK/ACT” LED indicator lights green indicating
100Mbps connection or it lights amber indicating 10Mbps
speed.
2.
The “FDX/COL LED” indicator lights green if the connection is
in full-duplex mode. The LED remains off when the connection
is in half-duplex mode.
