8
Step 5:
Locate an empty, non-shared bus mastering PCI slot and remove the corresponding
backplate. Save the screw for use in Step 6.
<Note>
i.
Do not install the TE100-PCIFC in a shared PCI slot. Avoid any PCI slot next to an ISA slot because this
is often a shared slot and does not support bus mastering.
ii.
If you are going to install the Remote Wake-Up cable, choose an available PCI slot most close to the 3-
pin Remote Wake-Up connector on the PC motherboard.
iii.
If you have problems in identifying a suitable slot, check your PC documentation or ask your system
administrator for help.
Step 6:
Carefully insert the TE100-PCIFC into the chosen slot and press firmly with proper push
to ensure it is fully seated in the slot.
Step 7:
Secure the TE100-PCIFC with the screw you saved in step 4.
<Note>
If you wish to use the Remote Wake-Up function, please complete the installation in next section
“Connecting the Remote Wake-Up Cable” before proceeding to step 7.
Step 8:
Replace the PC cover.
Step 9
: Turn the PC on again.
Step 10
: When the autorun pop up, click
Install Driver
, and then click your operating system.
<Note>
If the autorun did not appear, please go to the disk driver, right click on the explorer. In the
Driver
folder, click the the driver of
Windows 98SE_ME_2K_XP_Srv2003_Vista x86 Edition,
then click
WinSep.exe
to
execute the program.
Step 11
:
Wait until the TE100-PCIFC finishes the installing.
