10
Connecting Remote Wake-Up Cable
The unit support optional Wake-on-Lan magic packet feature. Proceed with the
installation only when your PC supports this remote wake-up and you wish to
use this function. If your PCI bus supports version 2.2 or higher, there is no
Wake-Up cable required. The feature can be enabled without using the cable.
For more detail information, please check the User’s Guide of your Motherboard.
Wake-on-LAN magic packet
Step 1:
Make sure the power to the PC is off.
Step 2:
Check if the TE100-PCIFC is properly installed in a PCI slot.
Step 3:
Prepare a Remote Wake-Up cable. Connect the cable from TE100-PCIFC to motherboard
connector.
Step 4:
Replace the PC cover.
Step 5:
Proceed to “Connecting to Your Network” Section.
Connect Remote Wake-Up cable from TE100-PCIFC to motherboard connector.
Plug in Remote Wake-Up cable to connector on Ethernet Adapter.
