TRENDnet TE-500plus, User Manual, Page: 8 / 14

4
LED Indicators
Power
(PWR):
This indicator lights green when the hub
is receiving power.
Collision
(COL):
This indicator indicates data collisions on
the hub. Whenever a collision is detected,
the respective COL indicator will briefly
blink amber.
Note: Occasional collision is
acceptable. If the collision LED is always
on, maybe there is a problem with the
network or the hub, or the network traffic
is high.
Link/Receive:
(LINK/RX) This indicator lights green when a
network connection is established. This
indicator blinks green when the hub is
receiving data packets.
BNC:
(TE-910 plus only)
This indicator blinks green when BNC
port connection has network activities
(network connection is established on the
BNC port).
Rear Panel Connectors
RJ45 MDI-X Twisted-pair Jacks
Use these jacks to connect Ethernet devices
(server/workstation/print server) to the hub. These are MDI-X
(Medium Dependent Interface, Cross-Wired) jacks, which
means you can use ordinary stright-through twisted-pair cables
to connect workstations and servers to the hub. If you need to
connect another device with an MDI-X jack, such as another