33
Appendix B
Appendix B
Appendix B
Appendix B
Enabler program error messages
CARDGO.EXE
Here is the list of error messages the CARDGO.EXE may display.
Error
Message
Solution
[Error 1]
“The PCMCIA controller is
not present or recognized”
There is no PCMCIA con-
troller on your computer.
Install a PCMCIA controller
from another computer.
[Error 2]
“There is no card in the
PCMCIA slot. Insert the
card.”
Ensure that the PC card is
correctly inserted into the
PCMCIA slot.
[Error 3]
“The card in PCMCIA slot is
not PCMCIA 10/100 Mbps
Ethernet Card. Insert it”
Ensure that the PC Card in
the notebook’s PCMCIA
slot is the Ethernet Card
and that it is correctly in-
serted.
[Error 4]
“The I/O ports do not re-
spond. Change to another
one”
Change to another I/O port
using /IO=xxx. Refer to
“Manual Installation” in
Chapter 4.
[Error 5]
“The I/O ports specified are
invalid. Change to another
one”
Valid I/O addresses are
240, 280, 300, 320, 340,
and 360.
[Error 6]
“The IRQ specified is invalid.
Change to another one”
Valid IRQ values are 3, 4,
5, 9, 10, and 11.
