14
Chapter 4
Chapter 4
Chapter 4
Chapter 4
Driver installation for DOS environments
This section covers PCMCIA 10/100 Mbps Ethernet Card driver
installation for DOS environment operating systems.
System Requirements
Hardware Requirements
Notebook equipped with Type II PC Card
slot and PC Card controller (compliant Rev.
2.1 or higher
Software Requirements
The Card & Socket service drivers should
comply with PCMCIA Release 2.1 or higher
Driver installation
You must install the PCMCIA 10/100 Mbps Ethernet Card drivers
before your computer system can recognize your Ethernet Card.
The following sections cover client driver installation.
Driver installation program
INSTALL is the PCMCIA 10/100 Mbps Ethernet Card driver in-
stallation program. The INSTALL program automatically selects
the most suitable option settings, or you can perform a custom
configuration where you individually select each setting.
