HI
-The blood alcohol content above the display range.
-Display range: 0.200%BAC
Important notes
•
Before testing, wait at least 15 minutes after your last drinking.
•
The blowing time must be enough until beeping stops.
•
It may show ERR (error) if none, interrupt or shorter blowing.
•
If the device changes temperature suddenly, wait some minutes to use.
•
Only use the device in a temperature 10°C -40°C or 50°F -104°F.
•
Recalibration interval: 12 months
•
Never store the device in a corrosive gas room.
•
Never store the device under sun exposure area.
•
Avoid dropping or subjecting the device to a strong shock.
Specifications
•
Electron-chemical sensor (Fuel Cell Sensor)
•
Blowing time: 6 seconds
•
Blowing flow: 10L/min
•
Display range: 0.000-2.000
‰
BAC
•
Show “HI” if above the display range
•
Accuracy:
+/-0.05
‰
at 0.5
‰
•
Memory: 5 records
•
5 mouthpieces included
•
Warm up time: 15 seconds
•
Testing Time: 10 seconds
•
Repeat test: less than 60 seconds.
•
Audible sound alarm if above 0.50
‰
BAC
•
4 digits display with status and backlight
•
Power supply: 9V battery
•
Battery for standard testing is about 800 times
•
Low battery indication and auto power off function
•
Operation: 10°C -40°C or 50°F -104°F.
•
Store: -10ºC ~ 60ºC or 14°F-140°F.
•
Size: 115x60x23mm
•
Recalibration interval suggest: 12 months
•
Blowing interrupt detection
Calibration and Record
•
You should have your alcohol tester calibrated every 12 months. Failure to do so may cause your
readings to be inaccurate.
Summary of Contents for TM-7500
Page 1: ......
