VARIJIG
-10-
Component
Clamp
Clamp
Clamp
Component
Varijig
ACCESSORIES
Please use only Trend original accessories.
Friction clamps are available. One clamp is
fitted at either end of the extrusion. Tighten
friction screw with No.2 Phillips
®
screwdriver.
Ref. VJS/CK
Sliding friction clamp (pair).
Clamping thickness 32mm
(1-1/4”).
Ref. VJS/CK/L
Sliding friction clamp (pair).
Clamping thickness 51mm
(2”).
Ref. VJS/PCK/L
Pivot head sliding friction
clamp (pair). Clamping
thickness 51mm (2”).
Infill Corner Pieces
MDF corner pieces can be user made and hot
melt glued into the corner of the frame to allow
decorative panel effects to be created. The
corner pieces must be of a suitable thickness.
MANU-VJS v3.0_MANU-VJS v3 18/06/2012 09:41 Page 10
