SM/PRO
-7-
ASSEMBLY
n
Check that there is no damage or
imperfections on your new jig.
n
Check that all the components are enclosed.
n
Please recycle all packaging.
n
Read all the safety instructions prior to use.
Fitting the Feet
n
Stand the jig on its back end and screw on
the six feet.
n
We recommend that the feet are attached
even if you are attaching the jig to a mitre saw
stand using the optional accessory,
Ref. SM/MKP. They will protect the roller
stop knobs on the underside of the base plate
from damage.
n
Please recycle all packaging.
n
Read all the safety instructions prior to use.
Safe Working Practice
n
We recommend that the jig is attached to a
chop saw stand using the mitre saw stand
mounting kit accessory Ref. SM/MKP.
n
The jig can also be used on a table, workmate
or workbench but it must be in a stable position.
Router Setup
n
Fit a 30mm guide bush to the router.
Ensure the guide bush is concentric to the
cutter. A sub-base may be required.
n
Fit the router cutter into the router following the
router machine manufacturer instructions.
Ensure that all the bolts, knobs and
slides are in the correct starting
position.
Ensure working position is comfortable.
Keep proper footing at all times.
Ensure jig is in a stable position before
use. Ensure jig is placed at a suitable
and comfortable height.
Ensure other end of workpiece is
supported properly.