-1-
☎
Dear Customer
Thank you for purchasing this Trend product.
We hope you enjoy many years of creative and
productive use of this product.
Please remember to return your guarantee card
within 14 days of purchase.
CONTENTS
TECHNICAL DATA _____________________1
SAFETY _____________________________2
– General ____________________________
2
– Routing Safety _______________________
3
– Additional Safety Rules for Router Cutters __
3
– Using Routers In A Fixed Position _______
4
– Useful Advice When Routing ____________
4
ITEMS ENCLOSED ____________________5
INTRODUCTION _______________________6
– Suitable Routers______________________
6
PIVOT JIG MODES _____________________7
DESCRIPTION OF PARTS _______________8
ASSEMBLY___________________________9
– Mini-Pivot & Ski Frame ________________
9
– Beam Trammel Mode ________________
10
OPERATION _________________________11
– Mini-Pivot Trammel Mode _____________
11
– Producing Circular Disc Work Surface____
12
– Setting-up Mini-Pivot Configuration ______
13
– Annular Disc Work __________________
14
– Simple Ski Mode ____________________
14
– Guided Planing Mode ________________
15
– Mounting The Workpiece ______________
16
ADVANCED APPLICATION _____________17
– Mini-Pivot Mode - off centre work ____
17-18
ACCESSORIES
______________________
19
MAINTENANCE ______________________19
– Cleaning ___________________________
19
– Lubrication _________________________
19
RECYCLING _________________________19
GUARANTEE ________________________19
SPARE PARTS _______________________20
– Spare Parts List & Diagram
____________20
PIVOT FRAME JIG
If you require further technical
information or spare parts, please call
our technical support department on
01923 224681.
The following symbols are used throughout this
manual:
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Denotes risk of electric shock.
Refer to the instruction manual of
your power tool.
This unit must not be put into service until it has
been established that the power tool to be
connected to this unit is in compliance with
98/37/EC (identified by the CE marking on the
power tool).
TECHNICAL DATA
Min. cutting dia. 10mm
Max. cutting dia. 320mm
Weight 1.4kg
Summary of Contents for PFJ/SET/1
Page 1: ...PIVOT FRAME JIG...
