DJ300
-8-
Mounting Instructions
Attaching Jig to Workbench
The jig should be secured to a workbench or
false work surface with the four screws supplied.
A false surface will protect the workbench and
can be quickly clamped with quick release
clamps.
Two screw locations are provided at the rear of
the jig and two on the lip at the front.
■
Mark the positions of the pilot holes for the
screws as shown.
■
Drill
1
/
8
” (3.2mm) pilot holes at these
locations.
■
Screw two of the No. 10 x
1
/
2
” self tapping
screws in the work top and leave the screw
heads 2mm proud of the surface.
■
Slide the jig over the two screw heads until
they locate.
■
Use the two remaining self tapping screws to
secure the lip of the jig to the workbench or
false work surface. The jig is now secure and
ready to use.
Making a False Work Surface
■
This can be constructed from 12mm to 18mm
MDF or similar material with a lip on the front
which will hook over the front of the
workbench. Suitable quick action clamps or
similar can then be used.
138mm
190mm
175mm
10mm
190mm
175mm
620mm
250mm
40mm
Summary of Contents for DJ300
Page 1: ...DJ300 DOVETAIL JIG...
