-14-
CRT MK2
ADJUSTMENT
Fence Adjustments
To make adjustment to the lateral movement of
the back fence:
■
Release the back fence knob.
■
Loosen the two screws that secure
the adjustable wedge.
■
Adjust position and re-tighten screws.
■
Re-tighten the back fence knob.
The back fence can be adjusted forwards and
backwards, using the graduated scales to gauge
the depth of mould.
For edge moulding, position the back fence with
the fastening bolts towards the front of the slot.
For panel grooving (i.e. routing of grooves away
from the edge of the workpiece) the fastening
bolts should be to the rear of the holes and slots.
Workpiece Support
The workpiece support provides safe guiding of
the workpiece when routing the complete edge
of the surface.
Adjustment range from:
0 to 12.7mm (1/2”)
Cutting Depth/Cutting Height
Before starting to work:
■
Adjust the cutting depth (A) by adjusting the
position of the back fence.
■
Adjust the cutting height (B) by raising or
lowering the cutter using a fine height
adjuster (if fitted). Alternatively rapid height
adjustment can be made if a PlungeBar is
fitted.
max.
58mm
32mm
