15
PREPARATION FOR USE
AIRPRO MAX
HEPA filter fitting and checking the respirator
Ensure that the high efficiency
particulate (HEPA) filter is installed
correctly as shown in Figure 6
When fitting the filter element into
the filter housing, observe that the
filter label faces upwards as worn.
Then applying firm pressure, click to
engage the filter housing with the
two filter latches.
If a pre-filter is to be used, ensure this is positioned inside the filter housing prior to
fitting the HEPA filter.
More information in section
High efficiency particulate air filter replacement
on
page
Correct positions of filters:
1.
Housing
2.
Odour / Pre-filter
3.
HEPA filter
2
3
1
Figure 7
Figure 6
