TREND NETWORKS R157000, User Manual

Page: 19 / 186

19
Depend On Us
18
www.trend-networks.com
Network Test - Trace Route
1. Connect the display unit to the network under test
2. Set the link speed to
Auto in the display unit via Settings - Network -
RJ45 - Link Speed
3. Set the IP address to
Dynamic (DHCP)
via
Settings - Network - IPv4 - IP
Assignment
4. After the unit link up and acquired IP address, the tester is ready to setup
5. Set up the target of Trace Route URL, max hop, type and time out
6. Press
Test
key to run the test
7. Save the results
8. Repeat procedure for Trace Route 6 Test
1
2 3
4
5
6
EN