11
Depend On Us
10
www.trend-networks.com
240810 Rev 1.
To operate the video scope, touch the Scope icon on the Home Screen.
Focus Ring
Adapter Tip
Getting started with the Video Inspection Scope
If a probe is not connected already,
connect the Video Inspection Probe
R240-VIP to the video probe port
on the top of the OTDR.
To remove a tip from the probe, grasp the probe tip and unscrew the tip
retention nut. As oriented in the picture; rotate left to loosen and right to
tighten the retention nut on the probe tip. Pull the tip straight up from the
probe. To place a tip on the probe, ensure the lens is clean, slide the tip on to
the end of the probe and tighten the tip retention nut. Do not over tighten the
retention nut.
Tip Retention Nut
Place proper tip on VIP
EN
