-
7
-
Configuring the Management Port
1
12
1. Go to [Network] > [Device Settings].
Connecting to the Network
1
13
Task
Action
Configure Management IP Address of the EdgeIPS Pro 216
Rugged
Device IP Address
Configure Netmask of the EdgeIPS Pro 216 Rugged
Netmask
Configure Gateway Address of the EdgeIPS Pro 216 Rugged
Gateway
Configure DNS setting of the EdgeIPS Pro 216 Rugged
DNS
Configure Network VLAN ID of the EdgeIPS Pro 216 Rugged
Network VLAN ID
Use the management port to access the EdgeIPS Pro 216 Rugged web console
from another computer on your network.
1. Connect one end of a Category 5e (Cat-5e) Ethernet cable to the MGMT port
located on the front panel.
2. Connect the other end of the cable to an Ethernet port connected to your
network.
2. In the [Device Settings] pane, configure the management port for EdgeIPS
Pro 216
Rugged
.
