No Light
The EdgeIPS appliance cannot communicate with a network.
RJ45
Checking the LED to Confirm Status
1
14
The LED on each Ethernet port shows the deployment status.
Left LED0:(Green)
GE LINK/ACT (off = no link, on = 1 Gbps link, blinking = activity)
Right LED1:(Green)
10/100Mbps LINK/ACT (off = no link, on = 10/100 Mbps link,
blinking = activity)
Appendix: Connecting to the Console Port
The EdgeIPS console port is a USB Type–C Port located on the front panel of the case. It is
designed for connection to serial console terminals for viewing messages during the boot
sequence or for debugging system boot issues. To connect the console cable, remove the
protective cover on the port.
Serial Console Port, Cable, & Pinouts
The initial configuration for the EdgeIPS using the command line interface (CLI) on a serial
terminal client will use the following default settings:
• Baud Rate: 115200 bps
• Character size: 8 bits
• Parity: None
• Stop Bits: 1
• Flow Control: None
USB Type C
-
7
-
