Setting the Management IP Address
1
12
1. Go to [ Device ] > [ Device Setting ]
Task
Action
Configure Management IP Address of the EdgeIPS
Device IP Address
Configure Netmask of the EdgeIPS
Netmask
Confiture GatewayAddress of the EdgeIPS
Gateway
2. In the [Network Setting] plane, configure management IP address for EdgeIPS
Configure DNS setting of the EdgeIPS
DNS
Configure Network VLAN-ID of the device
Network VLAN-ID
Connecting to the Network
1
13
EdgeIPS’s ports 1 and 2 make up a network segment.
Port 1 is a “mixed” port design, functioning both as the management console port and to
connect to a network node, so EdgeIPS’s Port 1 can be connected either to your network
switch/hub or to a laptop. Connecting this port to the network enables remote manage-
ment of the device.
EdgeIPS’s Port 2 links the IPS to the device or small production zone you are targeting for
protection.
1.
2.
-
6
-
