Trend Micro TippingPoint NX-Platform Hardware Installation And Safety Download Page 3

Page: 3 / 65

NX-Platform Hardware Installation and Safety

Contents

About this guide......................................................................................................................................1

Target audience...................................................................................................................................... 1

Related documentation...........................................................................................................................1

Conventions............................................................................................................................................ 1

Contacting support..................................................................................................................................3

System overview..................................................................................................................................... 4

TippingPoint architecture........................................................................................................................ 4

Security Management System (SMS).................................................................................................... 5

SMS server.......................................................................................................................................... 6
SMS client............................................................................................................................................6

Intrusion Prevention System devices..................................................................................................... 7

IPS local clients................................................................................................................................... 8

Core Controller....................................................................................................................................... 8

High availability.......................................................................................................................................9

Threat Suppression Engine....................................................................................................................9

Threat Management Center................................................................................................................. 10

Hardware safety and compliance........................................................................................................12

Safety and compliance requirements...................................................................................................12

Safety guidelines and warnings.........................................................................................................12
Cautions............................................................................................................................................. 13
Warnings.............................................................................................................................................13

Installation warnings........................................................................................................................13
Parts warnings.................................................................................................................................14

Summary of Contents for TippingPoint NX-Platform


































































Search results

Summary of Contents for TippingPoint NX-Platform

Reviews:

Related manuals for TippingPoint NX-Platform

Brands by name

Popular brands

Trend Micro TippingPoint NX-Platform, Hardware Installation And Safety

Search results

Summary of Contents for TippingPoint NX-Platform

Reviews:

Related manuals for TippingPoint NX-Platform

Brands by name

Popular brands