Tremitas Tremipen, Instructions For Use Manual

Page: 12 / 42

The following symbol is shown for all measurement
results below 10mG and 3Hz (underflow):
The following symbol is shown for all measurement
results over 1750mG (overflow):
All measurement results are beyond the measurement
range of the Tremipen® if they are below 10mG and
above 1750mG.
The preperation time was started, the
display shows a countdown (5, 4, 3, 2, 1)
The Tremipen® is in measurement
mode, this is shown with a progress bar
The tremor amplitude is shown; it
consists of a two- to four-digit number,
followed by the unit (mG)
The tremor amplitude was too low
The tremor amplitude was too high
The tremor frquency was too low
The battery is almost depleted / the
battery needs to be changed
The technical self-diagnosis function
was trigggered
The Tremipen® is in Bluetooth® mode
A system error occurred
4.1.3 Symbols on the Tremipen® Display
10