pressure monitor. If the batteries are removed for more
than 30 seconds, you must reset the Date/Time.
How to Apply the Wrist Cuff
1. Keep your left arm in front of you with your palm facing
up. Apply the wrist cuff so that the monitor is on the
inside of your wrist with the display facing up like your
palm.
2. As in the figure below, cover the wrist cuff by leaving a
space of 1/4”~1/2” between the edge of the wrist cuff
and the bottom of your palm.
3. Hold the end of the wrist cuff and wrap the cuff around
your wrist. For most accurate measuring results the cuff
should be tightened evenly and no room left between
the cuff and your wrist. (Do not pull the cuff too hard or
it will make the wrist cuff too tight.)
4. The excess part of the cuff can be folded over and
attached to the other side of the cuff.
Correct Measuring Position
For accurate readings, please sit or lie down prior to taking
a measurement. Rest your left arm on the table and use
the storage box, a cushion or a pillow as bolster. With left
13