Installing/Replacing Batteries
Be sure the unit turned off before installing/replacing
batteries, or the memories & Date/Time setting will be
erased.
If the batteries are removed for more than 30
seconds, the memories of the unit and the setting of
Date/Time will be erased
as well
.
Then, you must reset
the Date/Time.
1. Slide the battery compartment cover in the direction of
the arrow to remove it.
2. Place the batteries (two AAA Alkaline batteries) in the
compartment as indicated by the polarity symbols (+
and -) marked below. Then all symbols will be shown
on the screen for 1 second and then monitor will return
to standby mode.
3. Replace the battery compartment cover.
Note: When
(Low Battery indicator) appears on the
display, the batteries are weak. Change the batteries as
soon as possible, or it may not be able to take any
measurement and the memories and the Date/Time
setting of the unit may be lost.
11