16
installation
2.2 PMF uniT To STrucTure
This section showcases the various steps involved for installing the PMf unit to concrete.
MATeriAlS / conSuMABleS required
inForMATion
Timber / rubber blocks
The PMf must be placed on timber / rubber blocks
to avoid any damage to the rubber body.
recoMMended PerSonAl ProTecTiVe
equiPMenT
inForMATion
general PPe
As per site / plant requirements
equiPMenT required
inForMATion
Fasteners
supplied by Trelleborg
Spanner
suitable to the supplied bolt size
2.2.1 installation on concrete structure
❙
unfasten ropes which connect the mounting
brackets to the torsion tube.
❙
Identify the top side and orientation of the steel
panel from the general Arrangement drawing.
❙
fasten the lifting brace with two lifting points on
the top side of the steel panel as shown in the
image. rotate the torsion arms and fix the third
lifting point with the lifting brace.
Figure 9
: lifting brace installation on PMf
lifting points
lifting brace