TECHNICAL SPECIFICATIONS
(k) ** Equals the factor of uncertainty, which allows for variations in measurement and production. Vibration Data figures are tri-axial, which gives the
total vibration emission. Because of various factors, the range of vibration from these tools may vary 1.6m/s
2
& 5m/s
2
. The vibration is dependent on
the task, the operators grip and power source etc.
NOTE: The above vibration levels were obtained from tri-axial measurements to comply with the requirements of “The Control of Vibration at Work
Regulations 2005*” and the revisions to the (8662) now EN ISO 28927:2012 and EN ISO 20643:2005 series of standards. These values are at least
1.4 times larger than the values obtained from single axis measurements.
*Based on European Union Council Directive 2002/44/EC (Physical Agents (Vibration) Directive)
This tool has been designed and produced in accordance with the following directives:
2006/42/EC Machinery Directive
2006/95/EC Low Voltage Directive
If your company has any problem with our products or would like to discuss the possibility of an improvement being made to them, then please do not
hesitate to contact us. Your comments are both important and appreciated.
Trelawny SPT Ltd
Trelawny House, 13 Highdown Road, Sydenham Industrial Estate, Leamington Spa, Warwickshire,
CV31 1XT, United Kingdom
Telephone: +44 (0)1926 883781
Fax: +44 (0)1926 450352
Email: [email protected]
Website: www.trelawnyspt.com
© TSPT UK 2009 Part No: 735.6650 issue 3
SURFACE PREPARATION TECHNOLOGY
All rights reserved. Any unauthorised use or copying of the contents or part thereof is prohibited.
This applies to trademarks, model denominations, part numbers and drawings.
Use only genuine Trelawny spares.
The use of non-Trelawny spare parts invalidates the warranty.
Height (Handle in working position)
83mm(Lower) & 108mm(Higher)
32.5”(Lower) & 42.5”(Higher)
Height (Handle in raised position)
1920 mm
75.6”
Width
700 mm
27.5”
Length
1220 mm
48”
Cutting width
650 mm
25.5 inch
Average depth of cut (dependent on concrete)
1 mm
Disc rpm (Variable)
300 to 1400 rpm
Working distance from wall
40 mm
1.58”
Water tank capacity
40 litres (8.5 galls)
Weight
260kg
573lbs
Electric Motor
Dual voltage
7.5kW 400v 50/60hz
Noise L
wA
SWL
87.2 dB (A)
Vibration (AEQ) at the Handle Bar
a=1.97 m/s
2
(K= +40% -0%)
Noise level measured in accordance with
EN ISO 15744: 2008
Vibration measured in accordance with
EN ISO 28927:2012
EN ISO 20643:2005
