Trelawny TCG 250, Operation And Maintenance Manual

Page: 19 / 28

www.trelawny.co.uk
Drive components by model
Taper lock bushes include new grub screws (Not illustrated) for fitting. Also
supplied with data sheet with torque setting and method.
The TCG250 is available in a range of configurations. The appropriate drive
components for each variant are listed in the table below.
Note:
Honda N1 type shaft has a s v-belt pulley arrangement and is not a taper lock
pulley, this item has to be purchased as an assembly.
These are not user-serviceable parts. In the event of failure,
new assemblies will be need to be obtained from Trelawny.
Model Variant
D = Diamond Disc
QR = Quick Release Segment Disc
Model variant by part
number
Motor/engine/starter
N4 shaft prior to 2014
Motor bolts Motor nuts Motor washers
345.2400D/345.2400QR
350.9500 Honda N4 Shaft
806.5610 (x2) 824.0800 (x2) 811.1008 (x4)
345.9500 N1 Shaft
345.2402D/345.2402QR
345.9550 Motor
831.1240 (x4) 824.1200 (x4) 812.0712 (x8)
861.2002 Starter
345.2404D/345.2404QR
345.9560 Motor
831.1040 (x4) 824.1000 (x4) 811.0710 (x8)
861.2004 Starter
345.2406D/345.2406QR
350.9575 Motor
831.1240 (x4) 824.1200 (x4) 812.0712 (x8)
861.2007 Starter
MODEL VARIANT BY PART
NUMBER
(23) PULLEY (MOTOR)
(24) TAPER LOCK BUSH
(MOTOR)
(25) BELT (26) PULLEY (DRIVESHAFT)
(27) TAPER LOCK
BUSH (DRIVESHAFT)
345.2400D/QR
345.9130 Honda N4
345.9126A Honda N1
345.9129A N4
See (23) N1
345.9136 Honda N4
345.9126V Honda N1
345.9134 Honda N4
345.9126D Honda N1
345.9126M Honda
345.2402D/QR 345.9130 345.9129B 345.9135 345.9123 345.9125
345.2404D/QR 345.9130 345.9127A 345.9135 345.9124 345.9124A
345.2406D/QR 345.9143 345.9142 345.9138 345.9132 345.9126M
110v control system part no: 861.2005
230v control system part no: 861.2007
415v control system part no: 861.2009
Button assy Part no: 861.2018
Parts list model specific
PARTS LIST model specific
Model variant by part
number
(D=Diamond Disc)
Motor/engine/starter
N4 shaft prior to 2014
Motor bolts Motor nuts Motor washers
345.2000
5.5HP petrol
350.9500 Honda N4
shaft
345.9500 Honda N1
shaft
806.5610 (x2) 824.0810 (x2) 811.1008 (x8)
345.2000D
5.5HP petrol
350.9500 Honda N4
shaft
345.9500 Honda N1
shaft
806.5610 (x2) 824.0810 (x2) 811.1008 (x8)
345.2002
110V 1ph 1.8Kw
345.9550 motor
320.9144 starter
831.1240 (x4) 824.1200 (x4) 811.1012 (x8)
345.2002D
110V 1ph 1.8Kw
345.9550 motor
320.9144 starter
831.1240 (x4) 824.1200 (x4) 811.1012 (x8)
345.2004
230V 1ph 2.2kW
345.9567 motor
320.9145 starter
831.1240 (x4) 824.1200 (x4) 811.1012 (x8)
345.2004D
230V 1ph 2.2Kw
350.9560 motor
320.9145 starter
831.1040 (x4) 824.1000 (x4) 811.1010 (x8)
345.2006D
415V 3ph 5.5kW
350.9575 motor
325.9162 starter
831.1240 (x4) 824.1200 (x4) 811.1012 (x8)
Model variant by part
number
(23) PULLEY (MOTOR) (24) TAPER LOCK
BUSH (MOTOR)
(25) BELT (26) PULLEY
(DRIVESHAFT)
(27) TAPER LOCK
BUSH
(DRIVESHAFT)
345.2000D/QR
345.9130 Honda N4
345.9126A Honda N1
345.9129A N4
See (23) N1
345.9136 Honda N4
345.9126V Honda N1
345.9134 Honda N4
345.9126D Honda N1
345.9126M Honda
345.2002D/QR 345.9130 345.9129B 345.9135 345.9123 345.9125
345.2004D/QR
345.9130 345.9127A 345.9135 345.9124 345.9124A
345.2006D/QR 345.9143 345.9142 345.9138 345.9132 345.9126M
Taper Lock bushes include new grub
screws (Not illustrated) for fitting
Also supplied with data sheet with torque
setting and method.
Drive components by model
25
24
27
26
23
The TCG250 is available in a range of
configurations.
The appropriate drive components for each
variant are listed in the table below.
Note:
Honda N1 type shaft has a v-belt pulley
arrangement and is not a taper lock pulley,
this item has to be purchased as an
assembly.
HONDA N1 PULLEY