TrekStor TrekStor TV, User Manual

Page: 31 / 93

E
n
g
lis
h
Note . We recommend to use the LEFT (from front when standing)/TOP (when in horizontal position) USB
2.0 port.
In order to connect your TrekStor TV to a wireless environment you need to plug the "USB Wireless Adapter N"
(optional) to a USB 2.0 port on the back panel of your player. The TrekStor USB Wireless Adapter N supports
802.11n protocol.
1. Insert USB WiFi Antenna
※
The TrekStor TV can be disturbed by other wireless network services which may result in a relatively
low speed.
2. Select [Infrastructure (AP)].
3. Select the SSID type (available wireless network) that you want to use.
4. Enter correct passkey, and then press [OK].
1
Note
-
The “USB Wireless Adapter N” should only be used with the TrekStor TV or HomeServer e-TRAYz.
Many other devices will not be compatible.
-
Only “Web hex character codes” are supported.
- Web hex encoding supports 64-bit and 128-bit integers.
- If you have the problem of unstable wireless network or low speed, check your wireless channels for
optimum signal strength. Changing channel is possible via your router.
2
3 4
5. Network
5-2. Wireless LAN Setup
Settings