TrekStor Pyrus 2 LED, User Manual

Page: 17 / 61

17
Press the
/
-button briefly to activate the standby mode. The
standby screen will appear. To read further at the same place,
press the
/
-button again.
I)
microSD/microSDHC card slot: You can expand the storage
capacity of this eBook Reader with memory cards of a size up to
32 GB. Insert the memory card with the contacts facing up
the memory card slot until you feel a slight snap.
J)
Micro USB port: Connect your eBook Reader via the Micro
USB port and the included USB cable to your computer. Thus
you can save new eBook on your reader and charge the battery.
To charge the battery, you can alternatively also charge the
Reader with a suitable power supply (for example, the TrekStor
USB Charger e.fs) via the socket.
K)
Resetting:
If your eBook Reader no longer responds, you can
restart it by pressing the reset button on the back of the device.
To do this, you will need a small pin or a paper clip.
a
Attention: Please do not use needles or similar sharp
objects, because you can damage your eBook Reader.