treesse
treesse
Pg. 11
?
DESCRIPTION OF PARTS
Turn on
Upon switch-on, all LEDs turn on for 3 seconds, and then are displayed the version and the revision
of the software.
+
Filling
Functions
By pressing the
HYDROMASSAGE
and
DOWN
keys simultaneously,
tub filling will be activated.
The function is indicated by the
FILLING LED
that turns on.
Upon filling completion, and once all the conditions required for the
operation of the product are met, the system automatically shuts down
the function and makes available the
HYDROMASSAGE
,
RECIRCULATION
,
OZON
E and
HEATER
functions.
During the filling phase, if the timelines required for reaching the
minimum level (90 min.) and maximum level (15 min.) of water content
in the expansion vessel of the bathtub, the system displays an alarm
message "A1" (minimum level) and "AL2" (maximum level), thereby
locking all functions.
In that case, you will have to turn off and on again, after about 30
seconds,the power switch of the product.
When the spa system is used, the system automatically maintains
the level of the water overflowing from the edge of the tub.
+
Emptying
By pressing the COLOUR THERAPY and DOWN keys
simultaneously, you will activate tub emptying.
The function is indicated by the EMPTYING LED that turns on.
This feature can be enabled at any time.
With the EMPTYING function active, all the other functions are
disabled.
During the draining phase, if the timeline for reaching the minimum
level (60 min.) of water content in the expansion vessel of the bathtub
is not met, the system will display an alarm message "AL3 ", thereby
locking all functions.
In that case, you will have to turn off and on again, after about 30
seconds, the power switch of the product .
CONTROL PANEL
