treesse ATC System, Instructions For Use Manual

Page: 12 / 16

12
_RADIO REMOTE CONTROL - HOW TO USE
Key TN:
Led S1:
Led S2:
The hidden key TN is placed to the left of the company’s logo. By pressing and holding it,
the remote control will b switched off completely. You can restart it by pressing again the
hidden key until the backlight of the icons is restored.
The S1 signal icon displays only the status of the temperature regulator (which is
activated/deactivated with the button P1):
_ blue if on;
_ off if deactivated.
The S2 signal icon displays the status of the water level, set by default to about 5 cm above the
level of the nozzles, according to the following criteria:
_ blinking blue if not present;
_ fixed blue if present.
NB: t he key P7 , if pressed and held down, cancels the association of the radio controller with the receiver, followed by
the sequential ignition of key
P3
; while holding the latter, you will end the dissociation process.
If the radio controller were to dissociate itself from the receiver, only the icon of key
P4
b
will turn on,
by holding down the same key you will start the re-association process.