6. Once formatting is complete, use right/left arrows to navigate to home screen. Pictures will now
show as “0”.
Mounting
1. Remove tree mounting strap from packaging and remove tag end from buckle.
2. Thread tag end through back slots of camera body before attaching to tree or post.
3. Wrap strap around post and thread through buckle and pull tightly but be careful to not over
tighten and break buckle.
4. Make sure any lose end of strap is tucked away so it does not blow in front of sensor causing
false triggers.
Mounting Tips:
•
Recommended 25’-30’ mounting distance from target are for best image quality.
•
For improved image clarity, if possible, avoid mounting facing towards rising or setting
sun to reduce direct sunlight on lens.
Retrieving images
To view images, first power down the camera before removing SD card. Once camera is powered down,
press the SD card into the camera to release from camera and the SD card will eject.
Next, insert SD card into computer or external SD card viewing device. If your devise automatically
launches a viewing program or the device recognizes the external device a, follow the device
recommendations to view and sort images. If program does not launch automatically you will need to
open the “Start Menu” at the bottom of the screen and select computer. Locate the removable device in
the left-hand navigation. This will direct you towards the SD Card folder,
typically named “DCIM”. Select
this folder and then the sub folder “100Media”. The photos will be sorted in order and will each start with
the prefix “TSC_” followed by the number of the image that will also be on the image stamp.
Warranty
1-year limited warranty against manufacturer defects.
FCC Statement
Trade Name: Treeline
Power Source: 8Pcs. Of AA-Cell Alkaline Batteries
This devise complies with Part 15 of the FCC Rules. Operation is subject to the following two criteria: (1)
This device may not cause harmful interference, and (2) This device must accept any interference
receive, including interference that may cause undesired operation.
Warning:
Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
CAN ICES-3(b)/NMV-3(b)
Made in China
