background image

Rev 1, 11.15.2018 

 

Introduction 

What you should know about these Operating Instructions: 

 

Tree® Professional Weighing Equipment products are simple to operate. 

Nevertheless, you should read through these operating instructions in their entirety, so 
that you can make optimum use of the full potential and the diverse possibilities of the 
weighing machine in your daily work. 
 
These operating instructions contain guidance in the form of pictograms and keyboard 
diagrams, which should help you in finding the required information: 
 
For the labeling of potential hazards, please refer to the Safety proportion of this 
operation manual.  

 

Safety 

 

 Representations & Symbols 

 

Important instructions, which involve safety, are highlighted with the appropriate mark: 
 

 

 
 Safety recommendations 
 
When using the weighing equipment in surroundings with increased safety 
requirements, the corresponding regulations must be observed. 

 
The weighing scale may only be used with the power adapter supplied. 

Before connecting the power adapter to the scale, the user must ensure that the 
operating voltage stated on the power adapter is compliant with the mains voltage. 
If not, please contact Customer Service at the address above. 
 
If the power adapter or its cable is damaged, the weighing scale must immediately be 
disconnected from the electricity supply (pull out the power adapter).  
 

Summary of Contents for MRC2000




















Reviews: