501-SB-HWR (SWINGBEAM HARDWAREBAG)
INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.)
501-SB-HWR(
ORANGUTAN FORT
SWINGBEAM HARDWARE BAG)
INSTALLER NOTE: (YOU MUST ASSEMBLE THIS PRODUCT IN ACCORDANCE WITH THESE ASSEMBLY INSTRUCTIONS. WHEN COMPLETE GIVE MANUAL TO OWNER.)
SBH-10
1/2”x 10 1/2” Hex Bolt
QTY. 1
SBH-13
#14 x 1” Pan Phillips T/S
QTY. 2
SBH-11
3/8” x 5 Hex Lag Screw
QTY. 2
SBH-12
3/8” Nylon Insert LockNut
QTY. 8
SBH-15
1/2” Split Lockwasher
QTY. 8
SBH-16
3/8” USS Flatwasher
QTY. 12
SBH-19
3/8” Bolt Cup
Qty. 10
SBH-20
8 x 80mm Spring Clip
QTY. 6
SBH-17
1/2” USS Flatwasher
QTY. 9
SBH-18
3/4” USS Flatwasher
QTY. 7
***Note: Hardware
Pictures above may not be to scale
, p
lease use a Tape Measure to Verify Length.
Measurement should be taken from the bottom of the bolt head to the bottom of the bolt.***
**NOTE: HARDWARE PICTURES ARE FOR ILLUSTRATIVE PURPOSES ONLY AND MAY DIFFER FROM THE ACTUAL PRODUCT.
FOR EXAMPLE - TREAD COUNT AND LENGTH OF TREAD ON BOLT. ***
Summary of Contents for Orangutan Fort
Page 40: ......
