HARDWARE NEEDED
Hardware with Tarp
PARTS NEEDED
Tarp with Hardware
Extended Loft Tarp Assembly
(Figure A.)- Take one corner of the VINYL TARP and place it flush in the corner. Tap the snap with a blunt
object, leaving an indention of the snap in the wood. Repeat this process until all the snaps have been
indented in the wood on both sides of the Playcenter.
(Figure B.)- Using the indentions you just made with the snaps, take the 5/8” PHILLIPS SCREW SNAPS and
drill one into each indention.
(Figure C.)- Take the corner of the VINYL TARP and start placing the snaps on the PHILLIPS SCREW
SNAPS. Fold the VINYL TARP over the top of the UNIVERSAL TARP BOARD. Pull tight and place the snaps
on the PHILLIPS SCREW SNAPS.
