Trebs CC-105, Operation Manual

Page: 22 / 32

Fig. 3
Fig. 2
3.1.1 Temporarily place the monitor stand
in the location that you have chosen.
3.1.2 If you are using the supplied
Monitor Wiring Harness, route the
power cable to the vehicle's fuse box.
If you are using the 12V adapter,
route the power cable to the
vehicle's cigarette lighter socket/12V
power outlet.
The cable must not interfere with the
safe operation of the vehice.
Monitor with the 12 Volt
Cigarette Lighter Adapter
3.2 Mounting the Monitor
3.1 Choose a Location and Power Cable
Before permanently mounting the monitor,
clean the mounting area well with
isopropyl alcohol, then dry thoroughly.
Fig. 1
3.2.1 With the two pieces of the oval
Hook & Loop fastener attached to each
other,peel the backing paper from
Loop side the oval shaped Hook &
Loop fastener.(Fig. 1)
3.2.2 Next align the Hook & Loop fastener
with the bottom of the monitor stand
and press firmly to adhere.(Fig. 2)
3.2.3 With the Hook half of the hook
& loop fastener attached to the Loop
half you just attached to the monitor,
peel off the backing paper.(Fig. 3)
-4-