AUX LINE-IN CONNECTION
You can connect the
TREBLAB Z7 Pro
to compatible devices
using the supplied 3.5 mm audio cable.
Plug one end of the 3.5 mm audio cable into the AUX LINE-IN
port on the right earphone and plug the other end into the AUX
LINE-IN port on your device.
In the AUX mode, you can also use the
ANC/Ambient sound
fe adjust the volume. To do so, turn on the headphones
by pressing and holding the
POWER
button for 3 sec. Keep in
mind that in such case the inbuilt battery will still be drained.
NOTE:
NEXT, PREVIOUS, PLAY/PAUSE controls are not supported in
the AUX mode. You will need to make these adjustments using
your smart device.
AUDIO PLAYBACK
The
TREBLAB Z7 Pro
headphones are equipped with a highly
responsive
Touch panel
on the right earcup.
To pause and resume the playback when connected wirelessly,
double-tap
on the
Touch panel
.
To adjust the volume,
swipe up
on the
Touch panel
to raise
the volume and
swipe down
to lower the volume.
To change tracks on the
Z7 Pro
headphones,
swipe forward
on
the
Touch panel
to play the next track and
swipe backward
to play the previous track.