4
4
Securing the Top Rod to the Control
Housing:
The Top Rod is connected to the
Handle Unit through the use of a cam-lock
fitting located at the base of the LCD Assembly.
Pull the cam-lock lever downward and slide the
Top Rod into the Handle Unit. When the Top
Rod is fully seated, press the cam-lock lever
upwards so that it is flush with the rod.
5
Installing the Batteries:
Your Treasure Commander TC1X is powered by six (6)
AA batteries contained in the compartment found on the rear of the LCD Assembly pod.
To access the battery compartment, unscrew the two (2) screws found on the top of the
cover. Insert the batteries according to the markings inside the compartment making
sure that the batteries are properly aligned. Replace the battery compartment cover and
tighten the screws.
Either standard AA or rechargeable AA batteries can be used on the TC1X. Alkaline AA
batteries are recommended for optimal performance and service life.
NOTE
: The Treasure Commander TC1X features a continuous battery strength indicator
on the LCD screen which will help ensure you do not find yourself with dead batteries
miles from the nearest store. If the display indicates less than 25% of battery strength
remains, either replace the batteries or bring a spare set with you when you head out into
the field.
6
Adjusting the Display:
The TC1X offers a full range of adjustment to provide users
with optimal screen visibility. To adjust the angle of
the LCD Assembly pod for viewing under different
lighting conditions, you can tilt the pod forwards or
backwards.
NOTE:
Be careful not to force the pod into position
in order to avoid damaging the adjustment point.
Summary of Contents for TC1X
Page 2: ......
Page 23: ...Notes ...