3
April 14, 2018
When you power your clock for the first time, the time will be off since it does not know how
to connect to your WIFI network just yet. Turn the clock on, and log into it using
a wifi
enabled
computer, phone or tablet. Go to your connection settings on that device and under
available networks and select the
access point called “
NixieTimeModule
”.
NOTE: The “ NixieTimeModule” access point will only be activated on powerup AFTER an
unsuccessful attempt to connect to a WLAN. It’s a security feature. Since we tested the
interface at our factory before shipping, the module will need to complete an unsuccessful
attempt on your network. So for the first time, you must turn power on- wait 30 seconds, cycle
power.
Step 1: Select the NixieTimeModule access point
Search in the list of WIFI
networks for the one called “NixieTimeModule” and connect to it.
There is no password
Powering Your Clock the 1
st
Time- WIFI SETUP
