2.1 Start-up procedure
Before inserting the SIM card, make sure that there is no PIN code, you may use a normal
cellular telephone to verify this. In case a PIN code exists, it must be unlocked.
The Micro SD card supplied with the EG-3 has nothing memorized on board.
In order to verify this, it must be removed and inserted into Micro SD card reader.
To open the battery compartment on the back side of the EG-3, you must apply downward
pressure and have the cover slide towards the left.
The terminal block compartment can be opened the same way.
Insert the SIM card as shown in the battery compartment. Also insert the Micro SD card, if not
already inserted. This card is normally already factory installed.
Make sure that the “ON/OFF” switch located in the battery compartment is in “OFF” position.
With the dip-switch, select the functioning mode in which you would like to install the EG-3.
You may select from one of the 4 configurations seen in sections 3.0 to 6.0.
2.2 Functional LED Indicators
The LEDS positioned on the right of the EG-3 (see page 4), have the following functions:
•
The LED (1) indicates the Power and GPRS/GSM field presence. When the EG-3 is powered
up, this LED will become first Red (in presence of GSM field) and if there is presence of GPRS
field, it will then become Green.
•
The LED (2) will light up green when the EG-3 is armed, if the unit is disarmed with the
keychain transmitter it will go “OFF”.
•
The LED (3) will indicate if the GPRS module is functioning correctly. If it will flash slowly, the
GPRS module is connected to the network. If it will flash rapidly, no connection is present.
•
The blue LED (4), located inside of the battery compartment is used to indicate:
Initialization process;
Reset of stored memory;
Self learning of the “Pegaso” radio codes received from the sensors and keychain
transmitters installed in mode EG-3HW, EG-3SL and EG-3SLM.
2.3. Keychain transmitters used with EG-3
PEG-1 WATER PROOF
HOLD-UP or PANIC
TRIGGER BUTTON
LED TRANSMIS-
SION INDICATOR
PEG-3
HOLD-UP or PANIC
TRIGGER BUTTON
LED TRANSMIS-
SION INDICATOR
ARM and DISARM
BUTTON
NOT USED
Page 23
EG-3 Instruction manual
ENGLISH
