8
The setting temperature appears on the display for a few seconds. The display flashes
several times and then the interior temperature is displayed again.
Temperature range of the Display is -30-60
°C.
NOTE
If the ambient temperature is above +32°C (+90 °F), the minimum temperature cannot be
attained.
s
hould be used combining with
button. Without pressing
button,
are useless.
The set-up parameters are still effective when the ICERHINO freezer is energized
again; it means that the ICERHINO freezer has memory function.
When the ICERHINO freezer’s interior temperature reaches the setting
temperature, compressor stop work. Power indicator light turn to orange color. In switch
on status, the color of power indicator light shows the compressor status, green indicates
working, orange indicates stopping.
5. Battery protector setting
The device is equipped with a multi-level battery protector that protects your vehicle
battery against excessive discharging when the device is connected to the on-board 12/24
V supply.
If the ICERHINO freezer is operated when the vehicle ignition is switched off, the
ICERHINO freezer switches off automatically as soon as the supply voltage falls below a
set level. The ICERHINO freezer will switch back on once the battery has been recharged
to the restart voltage level.
NOTICE! Danger of damage!
When switched off by the battery monitor, the battery will no longer be fully charged. Avoid
starting repeatedly or operating current consumers without longer charging phases.
Ensure that the battery is recharged.
-Press the
button for 4 times, then come into battery protection setting mode;
Use
button to change between the level settings;
Digital display will be as follows:
V
L
(LOW), V
M
(MED), V
H
(HIGH)