Traxxas Villain 1506, Owner'S Manual

Page: 7 / 24

7
The following guide is an overview of the
procedures for getting your Villain set up and
running. Refer to the pages indicated for details on each step. Look
for the Quick Start logo on the bottom corners of Quick Start pages.
1. Charge the battery pack • See page 11
The Villain requires a fully charged 7.2-volt battery pack (not
included). Charge your battery now so it will be ready when
you finish the other setup procedures.
2. Install the antenna • See page 12
Install the antenna mast in the Villain.
3. Install batteries in the transmitter • See page 11
The transmitter requires 8 AA alkaline batteries.
4. Install the battery pack in the model • See page 11
5. Turn on the radio system • See page 14
Make a habit of turning the transmitter on first, and off last.
6. Check servo operation • See page 15
Make sure the steering servo is working correctly.
7. Range test the radio system • See page 15
Follow this procedure to make sure your radio system works
properly at a distance and that there is no interference from
outside sources.
8. Detail your Villain • See page 8
9. Drive your Villain • See page 19
Driving tips and adjustments for your Villain.
10. Maintaining your Villain • See page 21
Follow these critical steps to maintain the performance of
your Villain and keep it in excellent running condition.
Quick Start: Getting up to Speed
The Quick Start
Guide is not
intended to
replace the full operating
instructions available in
this manual. Please read
this entire manual for
complete instructions
on the proper use and
maintenance of
your Villain.