background image

6 • SPARTAN

TOOLS, SUPPLIES AND REQUIRED EQUIPMENT

Your model comes with a set of specialty metric tools. You’ll need to purchase other items, available from your hobby dealer, to operate 
and maintain your model.

For more information on 
batteries, see 

Use the Right 

Batteries 

on page 12.

Recommended Equipment

These items are not required 
for the operation of your 
model, but are a good idea to 
include in any R/C toolbox:
• Safety glasses
• Thin, hobby-quality 

cyanoacrylate instant tire 
glue (CA glue)

• Hobby knife
• Side cutters and/or needle 

nose pliers

• Philips screwdriver 
• Soldering iron 

 

Two NiMH battery packs*
Deux piles NiMH*
Dos baterías de NiMH*
Zwei NiMH-Batterien*

2 Battery chargers*
2 Chargeurs de piles*
2 Cargadores de batería*
2 Batterieladegeräte*

(5707 Only) 

NiMH battery charger

(Seulement pour 5707) 

Chargeur de pile NiMH

(Solamente para 5707)

 Cargador de batería de NimH

(Nur für 5707) 

Ladegerät für NiMH-Batterien

4 AA alkaline batteries
4 piles alcalines AA 
4 baterías alcalinas AA
4 AA Alkaline Batterien

Supplied Tools and Equipment 

• Outils et équipements fournis • Equipo y herramientas suministradas • Mitgeliefertes Werkzeug und Ausrüstung

Required Equipment 

• Équipement requis • Equipo requerido • Benötigte Ausrüstung 

#5707L

*Battery and charger style are subject to change and may vary from images. *Le type de pile et de chargeur peut changer et ne pas correspondre aux images.  *Los tipos de cargador y batería están sujetos a 

cambio y pueden diferir de las imágenes. *Die Art der Batterien und des Ladegeräts kann jederzeit geändert werden und kann eventuell von den Fotos abweichen.

LiPo battery* 

Batteries packaged separately.  
Ask your dealer for details.

Pile LiPo* 

Les piles sont livrées séparément.  
Demandez des détails à votre marchand.

Batería LiPo* 

Las baterías se embalan de manera individual. 
Pregunte a su distribuidor los detalles.

LiPo-Batterie* 

Batterien separat verpackt. Fragen Sie Ihren 
Händler nach Details.

#5707

4-way wrench
Clé à quatre sens
Llave cruz
4-Weg-Schlüssel

1.5mm “L”  wrench
Clé “L” de 1,5mm
Llave Allen de 1.5 mm
1,5 mm Innensechskantschlüssel

2.0mm “T” wrench
Clé “T” de 2,0mm
Llave “T” de 2.0 mm
2,0 mm „T“-Schlüssel

2.5mm “T” wrench
Clé “T” de 2,5mm
Llave “T” de 2.5 mm
2,5 mm „T“-Schlüssel

Two 10mm motor coupler wrenches
Deux clés coupleur motrice de 10mm 
Dos llaves de conexión de motor de 10 mm 
Zwei10 mm-Motor-Kupplungsschlüssel

Spare Propeller
Hélice de rechange 
Hélice de repuesto 
Ersatzschraube

Boat stand
Stand de bateau
Soporte de barco
Boot Halterung

Summary of Contents for Spartan 5707































Reviews: