16
•
Slash
Patent-Pending Training
Mode (Profile #3) reduces
forward and reverse throttle
by 50%. Training Mode
is provided to reduce the
power output allowing
beginning drivers to better
control the model. As driving
skills improve, simply change
to Sport or Race Mode for
full-power operation.
Profile Description
Profile #1 (Sport Mode): 100% Forward, 100% Brakes, 100% Reverse
Profile #2 (Race Mode): 100% Forward, 100% Brakes, No Reverse
Profile #3 (Training Mode): 50% Forward, 100% Brakes, 50% Reverse
Selecting Sport Mode
(Profile #1: 100% Forward, 100% Brakes, 100% Reverse)
1.
Connect a fully charged battery
pack to the XL-5 and turn on your
transmitter.
2.
With the XL-5 off, press and hold
the set button until the light turns
solid green, then solid red and then
begins blinking red (indicating the
Profile numbers).
3.
When the light blinks red once,
release the set button.
4.
The light will then turn green and the model is ready to drive.
Selecting Race Mode
(Profile #2: 100% Forward, 100% Brakes, No Reverse)
1.
Connect a fully charged battery
pack to the XL-5 and turn on your
transmitter.
2.
With the XL-5 off, press and hold
the set button until the light turns
solid green, then solid red and then
begins blinking red (indicating the
Profile numbers).
3.
When the light blinks red twice,
release the set button.
4.
The light will then turn green and the model is ready to drive.
Selecting Training Mode
(Profile #3: 50% Forward, 100% Brakes, 50% Reverse)
1.
Connect a fully charged battery
pack to the XL-5 and turn on your
transmitter.
2.
With the XL-5 off, press and hold
the set button until the light turns
solid green, then solid red and then
begins blinking red (indicating the
Profile numbers).
3.
When the light blinks red three
times, release the set button.
4.
The light will then turn green and the model is ready to drive.
Note:
If you missed the mode you wanted, keep the SET button
pressed down and the blink cycle will repeat until a Mode is selected.
B
One blink Red
A
Green to Red to Off
D
Solid Green
C
Release
Adjusting the Electronic Speed Control
Tip For Fast Mode Changes
The XL-5 is set to Profile 1
(Sport Mode) as the default.
To quickly change to Profile 3
(Training Mode), with the
transmitter on, press and
hold the SET button until the
light blinks red three times
and then release.
For full power, quickly change
back to Profile 1 (Sport Mode)
by pressing and holding the
SET button until the light
blinks red one time and
then releasing.
B
Two blinks Red
A
Green to Red to Off
D
Solid Green
C
Release
B
Three blinks Red
A
Green to Red to Off
D
Solid Green
C
Release
