background image

SLASH 4x4 • 3

BEFORE YOU PROCEED

Carefully read and follow all instructions in this and any 
accompanying materials to prevent serious damage to your  
model. Failure to follow these instructions will be considered  
abuse and/or neglect.
Before running your model, look over this entire manual and 
examine the model carefully. If for some reason you decide it is not 
what you wanted, then do not continue any further. 

Your hobby 

dealer absolutely cannot accept a model for return or exchange 
after it has been run.

WARNINGS, HELPFUL HINTS, & CROSS-REFERENCES

Throughout this manual, you’ll notice warnings and helpful hints 
identified by the icons below. Be sure to read them!

An important warning about personal safety or avoiding
damage to your model and related components. 

Special advice from Traxxas to make things easier  
and more fun.

Refers you to a page with a related topic.

SUPPORT

If you have any questions about your model or its operation, 
call the Traxxas Technical Support Line toll-free at: 

1-888-TRAXXAS (1-888-872-9927)

*

Technical support is available Monday through Friday from  
8:30am to 9:00pm central time. Technical assistance is also available 
at Traxxas.com/support. You may also e-mail customer support with 
your question at [email protected]. Join thousands of registered 
members in our online community at Traxxas.com.
Traxxas offers a full-service, on-site repair facility to handle any  
of your Traxxas service needs. Maintenance and replacement  
parts may be purchased directly from Traxxas by phone or online  
at BuyTraxxas.com. You can save time, along with shipping  
and handling costs, by purchasing replacement parts from your  
local dealer.
Do not hesitate to contact us with any of your product support needs. 
We want you to be thoroughly satisfied with your new model!

SAFETY PRECAUTIONS

All of us at Traxxas want you to safely enjoy your new model. Operate 
your model sensibly and with care, and it will be exciting, safe, and fun 
for you and those around you. Failure to operate your model in a safe and 
responsible manner may result in property damage and serious injury. 
The precautions outlined in this manual should be strictly followed to help 
ensure safe operation. You alone must see that the instructions are followed 
and the precautions are adhered to.

Important Points to Remember

• Your model is not intended for use on public roads or congested areas 

where its operation can conflict with or disrupt pedestrian or vehicular 
traffic.

• Never, under any circumstances, operate the model in crowds of people. 

Your model is very fast and could cause injury if allowed to collide with 
anyone.

• Because your model is controlled by radio, it is subject to radio interference 

from many sources that are beyond your control. Since radio interference 
can cause momentary losses of radio control, always allow a safety margin 
in all directions around the model in order to prevent collisions.

• The motor, battery, and speed control can become hot during use. Be 

careful to avoid getting burned.

• Don’t operate your model at night, or anytime your line of sight to the 

model may be obstructed or impaired in any way.

• Most importantly, use good common sense at all times.

Speed Control

Your model’s electronic speed control (ESC) is an extremely powerful 
electronic device capable of delivering high current. Please closely follow 
these precautions to prevent damage to the speed control or other 
components.

• Disconnect the Battery: Always disconnect the battery or batteries from the 

speed control when not in use. 

• Insulate the Wires: Always insulate exposed wiring with heat shrink tubing 

to prevent short circuits.

• Water and Electronics Do Not Mix: The speed control is waterproof for 

use in mud, snow, puddles, and other wet conditions. Make certain the 
other components of your model are waterproof or have sufficient water 
resistance before driving in wet conditions.

• Transmitter on First: Switch on your transmitter first before switching on 

the speed control to prevent runaways and erratic performance.

• Don’t Get Burned: The ESC and motor can become extremely hot during 

use, so be careful not to touch them until they cool. Supply adequate 
airflow for cooling.

Traxxas
6200 Traxxas Way
McKinney, TX 75070
Phone:  972-549-3000
Toll-free 1-888-TRAXXAS

Internet
Traxxas.com
E-mail: [email protected]

Entire contents ©2014 Traxxas. 
Traxxas, Ready-To-Race, Ready-
To-Win, Slash, Slash 4X4, Velineon, 
and ProGraphix are trademarks 
or registered trademarks of 
Traxxas. Other brand names and 
marks are the property of their 
respective holders and are used 
only for purposes of identification. 
No part of this manual may be 
reproduced or distributed in print 
or electronic media without the 
express written permission of 
Traxxas. Specifications are subject 
to change without notice.

*Toll-free support is available to U.S. residents only.

1

Summary of Contents for Slash 4x4 68086



































Reviews: