background image

4 • NITRO SLASH

This model is not intended 
for use by children (minors) 
under 16 years of age 
without the supervision 
of a responsible and 
knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

SAFETY PRECAUTIONS

Models require detailed 
setup, and/or maintenance 
procedures with required 
support equipment. 
Previous experience with 
radio controlled models 
is mandatory. These 
models are capable of very 
high speeds and require 
an even higher level of 
skilled driving control.

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.
Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 
models are capable of high speeds, requiring experienced driving control. 
Models require detailed setup, and/or maintenance procedures with required 
support equipment. 

Previous experience with radio controlled models is mandatory. 
These models are capable of very high speeds and require an even higher 
level of skilled driving control. Models require detailed setup, and/or mainte-
nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

Previous experience with radio controlled models is recommended.
Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.
Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of high speeds, requiring experienced driving control. Model requires 
detailed setup, and/or maintenance procedures with required support 
equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of very high speeds and requires an even higher level of skilled driving 
control. Model requires detailed setup, and/or maintenance procedures with 
required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

 Previous experience with radio controlled models is recommended.
Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

1

All of us at Traxxas want you to safely enjoy your new Nitro Slash. Operate your Nitro 
Slash sensibly and with care, and it will be exciting, safe, and fun for you and those 
around you. Failure to operate your Nitro Slash in a safe and responsible manner may 
result in property damage and serious injury. The precautions outlined in this manual 
should be strictly followed to help ensure safe operation. You alone must see that the 
instructions are followed and the precautions are adhered to. 

IMPORTANT POINTS TO REMEMBER

•  Nitro Slash is very fast! The Nitro Slash is intended for experienced users with a 

high level of skill. The TRX 3.3 Racing Engine is extremely powerful and may require 
skilled driving to maintain control. Children under 16 years of age and inexperienced 
drivers should not operate the Nitro Slash without the supervision of a responsible 
and knowledgeable (experienced) adult.

• 

Model engine fuel is dangerous and highly poisonous.

 Always follow all directions 

and precautions printed on the fuel container. Model engine fuel is poisonous to 
humans and animals. Drinking the fuel can cause blindness and death. Handle with 
care and respect.

•  Model engine fuel, especially when in a fuel dispensing bottle, may look like a cool 

drink to a child. 

Keep all fuel out of the reach of children at all times. Do not place 

fuel containers on the ground where children can reach them while you are driving.

•  Model engine fuel is flammable. Never allow smoking, sparks, heat, or flame in the 

presence of fuel or fuel vapors.  

•  The engine, brakes, and exhaust system may become extremely hot during use. Be 

careful not to touch these parts, especially when refueling or stopping the engine.

•  Prolonged exposure to the engine exhaust can be harmful. Avoid breathing the 

engine exhaust. Always run your Nitro Slash outdoors, in a well-ventilated area. 
Never run the engine indoors. 

•  Do not operate your Nitro Slash at night, or anytime your line of sight to the model 

may be obstructed or impaired in any way.

•  Never operate your Nitro Slash in crowds of people or busy pedestrian areas. Nitro 

Slash is very fast  and could cause injury to those unaware of its presence. Keep 
small children at a safe distance away from the operating area.

•  Because Nitro Slash is controlled by radio, it is subject to radio interference from 

many sources beyond your control. Since radio interference can cause momentary 
loss of control, always allow a safety margin in all directions around your model to 
prevent collisions. 

•  Do not kink the antenna wire. Kinks in the antenna wire will reduce range.
•  The engine can be loud. If the noise makes you uncomfortable, wear ear protection. 

Be considerate of your neighbors by not running your model early in the morning 
or late in the evening.

•  Do not cut the antenna “stinger” or any other part of the antenna wire. Cutting the 

antenna will reduce range.

•  You must extend the antenna wire in the model as far as possible for maximum 

range. In doing so, the antenna wire will be extended outside of the vehicle body. 
Do not wrap or coil the antenna wire to keep it from extending out of the body.

•  Do not allow the antenna wire to extend outside the body without the protection of 

an antenna tube, or the antenna wire may incur crash damage that could  
reduce range.

• 

Most importantly, use good common sense at all times.

BATTERIES AND BATTERY CHARGING

Your model uses rechargeable batteries that must be handled with care for 
safety and long battery life. Make sure to read and follow all instructions and 
precautions that were provided with the battery packs and your charger. It 
is your responsibility to charge and care for the battery packs properly. In 
addition to your battery and charger instructions, here are some more tips to 
keep in mind.
•  Use the supplied charger to charge the included battery. See “Charging the 

EZ-Start Battery” on page 21.

•  Do not charge batteries inside of an automobile. Do not charge batteries 

while driving in an automobile. The charger is equipped with a long cord 
intended to allow the battery to be charged outside of an automobile when 
using the automobile’s auxiliary power socket. If the cord will not reach 
outside of the automobile, find another power source.

•  Never leave batteries to charge unattended.
•  Allow the battery pack to cool off before charging.
•  Do not use battery packs that have been damaged in any way. Do not use 

battery packs that have damaged wiring, exposed wiring, or a damaged 
connector as this may create the risk of fire.

•  Children should have responsible adult supervision when charging and 

handling batteries.

•  Never charge batteries on wood, cloth, carpet or on any other flammable 

material.

•  Do not operate the charger in a cluttered space, or place objects on top of 

the charger or battery.

•  If a battery gets hot to the touch during the charging process (temperature 

greater than 140°F / 60°C), disconnect the battery from the charger and 
discontinue charging immediately.

•  Always store battery packs safely out of the reach of children and pets.
•  Do not expose the charger to water or moisture.
•  Do not disassemble the charger.
•  Only use approved chargers for Nickel Metal Hydride (NiMH) battery packs. 

Do not exceed the maximum charge rate of 1 amp.

•  Do not short-circuit the battery pack. This may cause burns and severe 

damage to the battery pack.

•  Do not burn or puncture the batteries. Toxic materials could be released. If 

eye or skin contact occurs, flush with water.

•  Store the battery pack in a dry location, away from heat sources and direct 

sunlight.

•  NiMH batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery 
when it has reached the end of its useful life. 

Do not throw your battery in 

the trash. 

All Power Cell NiMH battery packs display the RBRC (Rechargeable 

Battery Recycling Corporation) icon, indicating they are recyclable. To 
find a recycling center near you, ask your local hobby dealer or visit www.
call2recycle.org.

44054-1-KC2216-R00_Nitro_Slash_Owners.indd   4

9/11/14   4:15 PM

Summary of Contents for Nitro Slash 44054-1



































Reviews: