background image

4 • E-REVO

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

SAFETY PRECAUTIONS

Previous experience with 
radio controlled models 
is recommended. Models 
require a higher level of 
setup, maintenance, or 
support equipment.

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.
Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 
models are capable of high speeds, requiring experienced driving control. 
Models require detailed setup, and/or maintenance procedures with required 
support equipment. 

Previous experience with radio controlled models is mandatory. 
These models are capable of very high speeds and require an even higher 
level of skilled driving control. Models require detailed setup, and/or mainte-
nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

Previous experience with radio controlled models is recommended.
Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.
Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of high speeds, requiring experienced driving control. Model requires 
detailed setup, and/or maintenance procedures with required support 
equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of very high speeds and requires an even higher level of skilled driving 
control. Model requires detailed setup, and/or maintenance procedures with 
required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

 Previous experience with radio controlled models is recommended.
Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

1

• 

Use the supplied charger to charge the included battery. See “Charging the 
Battery Pack” on page 11.

• Never leave batteries to charge unattended.
• Remove the battery from the model while charging.
• Always unplug the battery from the electronic speed control when the 

model is not in use and when it is being stored or transported.

• Allow the battery pack to cool off between runs (before charging).
• Children should have responsible adult supervision when charging and 

handling batteries.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, or a 

damaged connector.

• Do not short-circuit the battery pack. This may cause burns and severe 

damage to the battery pack.

• Do not burn or puncture the batteries. Toxic materials could be released. If 

eye or skin contact occurs, flush with water.

• Store the battery pack in a dry location, away from heat sources and direct 

sunlight.

• Nickel Metal Hydride batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery 
when it has reached the end of its useful life. 

Do not throw your battery in 

the trash

. All Power Cell NiMH battery packs display the RBRC (Rechargeable 

Battery Recycling Corporation) icon, indicating they are recyclable.  
To find a recycling center near you, ask your local hobby dealer or visit  
www.call2recycle.org.

LiPo BATTERIES

Lithium Polymer (LiPo) batteries are becoming popular for use in  R/C 
models due to their compact size, high energy density, and high-current 
output. However, these types of batteries require special care and handling 
procedures for long life and safe operation. 

WARNING: LiPo batteries are 

intended only for advanced users that are educated on the risks associated 
with LiPo battery use. Traxxas does not recommend that anyone under 
the age of 14 use or handle LiPo battery packs without the supervision of a 
knowledgeable and responsible adult.

Your model is able to use LiPo batteries with nominal voltage not to 
exceed 7.4 volts (2S packs) for each battery (4S total). LiPo batteries 
have a minimum safe discharge voltage threshold that should not be 
exceeded. The EVX-2 electronic speed control is equipped with built-in 
Low-Voltage Detection that alerts the driver when LiPo batteries have 
reached their minimum voltage (discharge) threshold

It is the driver’s 

responsibility to stop immediately to prevent the battery pack from being 
discharged below its safe minimum threshold.

Low-Voltage Detection on the speed control is just one part of a 
comprehensive plan for safe LiPo battery use.

 It is critical for you, the user, 

to follow all other instructions supplied by the battery manufacturer 

and the charger manufacturer for proper charging, use, and storage of 
LiPo batteries. Do not attempt to charge LiPo batteries with the Traxxas 
charger included in this package. Make sure you understand how to use 
your LiPo batteries.

 Be aware that Traxxas shall not be liable for any special, 

indirect, incidental, or consequential damages arising out of the installation 
and/or use of LiPo batteries in Traxxas models. 

If you have questions about 

LiPo battery usage, please consult with your local hobby dealer or contact 
the battery manufacturer. 

As a reminder, all batteries should be recycled at 

the end of their useful life.
DO NOT ATTEMPT TO CHARGE LIPO BATTERIES OR ANY OTHER TYPE OF 
BATTERY WITH THE INCLUDED TRAXXAS CHARGER

 

SPEED CONTROL

•  Disconnect the Batteries: Always disconnect the batteries from the speed 

control when not in use. 

•  Transmitter on First: Switch on your transmitter first before switching on 

the speed control to prevent runaways and erratic performance.

•  Don’t Get Burned: The heat sink can get extremely hot, so be careful not 

to touch it until it is cool. Supply adequate airflow for cooling.

•  Always adhere to the minimum 

and maximum limitations 
of the EVX-2 as stated in the 
specifications table. 

Do not mix 

battery types and capacities. 
Use the same voltage and 
capacity for both batteries. 
Using mismatched battery 
packs could damage the 
batteries and electronic speed 
control.

•  Use Stock Connectors: If you decide to change the battery or motor 

connectors, only change one battery or motor connector at a time. This 
will prevent damage from accidentally mis-wiring the speed control. 
Please note that modified speed controls can be subject to a rewiring fee 
when returned for service. Removing the battery connector on the speed 
control or using connectors with no reverse-polarity protection on the 
speed control will void the product’s warranty.

•  Insulate the Wires: Always insulate exposed or damaged wiring with heat 

shrink tubing to prevent short circuits

•  No Reverse Voltage: The speed control is not protected against reverse 

polarity voltage. When changing the battery and/or motor, be sure to 
install the same type of connectors to avoid reverse polarity damage to 
the speed control. Removing the battery connectors on the speed control 
or using the same-gender connectors on the speed control will void the 
product’s warranty.

•  No Schottky Diodes: External Schottky diodes are not compatible with 

reversing speed controls. Using a Schottky diode with the EVX-2 will 
damage the ESC and void the 30-day warranty.

1500

3600

Do not mix battery 

capacities. Use two 

batteries with the  

same capacity. 

1500

3600

Do not use a 6-cell 7.2V 

battery in combination 

with a 7-cell battery 

8.4V pack.

Summary of Contents for E REVO 56036






































Reviews: