Traxxas 56086-4, Owner'S Manual

Page: 7 / 38

E-REVO BRUSHLESS • 7
QUICK START: GETTING UP TO SPEED
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on pages 3-4 6. Check servo operation • See page 14
For your own safety, understand where carelessness and misuse
could lead to personal injury. Make sure the steering servos are working correctly.
2. Charge the battery packs • See page 11 7. Range test the radio system • See page 14
Your model requires two battery packs and a compatible battery
charger (not included). Never use a NiMH or NiCad charger to
charge LiPo batteries. Follow this procedure to make sure your radio system works properly
at a distance and that there is no interference from outside sources.
3. Install batteries in the transmitter • See page 11 8. Detail your model • See page 8
The transmitter requires 4 AA alkaline batteries (sold separately). Apply other decals if desired.
4. Install battery packs in the model • See pages 12-13 9. Drive your model • See page 16
Your model requires two fully charged battery packs
(not included). Driving tips and adjustments for your model.
5. Turn on the radio system • See page 13 10. Maintaining your model • See page 26
Make a habit of turning the transmitter on first, and off last. Follow these critical steps to maintain the performance
of your model and keep it in excellent running condition.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.