background image

4 • E-REVO BRUSHLESS

This model is not intended 
for use by children under 
14 years of age without the 
supervision of a responsible 
and knowledgeable adult.

All instructions and 
precautions outlined in this 
manual should be strictly 
followed to ensure safe 
operation of your model.

SAFETY PRECAUTIONS

Previous experience with 
radio controlled models 
is recommended. Models 
require a higher level of 
setup, maintenance, or 
support equipment.

Skill Level = Myriad Semi Bold

1 2 3 3+ 4 5

bluehighway font

For Expert Drivers

Choose the Model That is Right For You.

For individual Models

No previous experience with radio controlled models is required.
Models require a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. These 
models are capable of high speeds, requiring experienced driving control. 
Models require detailed setup, and/or maintenance procedures with required 
support equipment. 

Previous experience with radio controlled models is mandatory. 
These models are capable of very high speeds and require an even higher 
level of skilled driving control. Models require detailed setup, and/or mainte-
nance procedures with required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

Previous experience with radio controlled models is recommended.
Models require a higher level of setup, maintenance, or support equipment. 

No previous experience with radio controlled models is required.
Model requires a minimum of setup, maintenance, or support equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of high speeds, requiring experienced driving control. Model requires 
detailed setup, and/or maintenance procedures with required support 
equipment. 

Previous experience with radio controlled models is mandatory. This model is 
capable of very high speeds and requires an even higher level of skilled driving 
control. Model requires detailed setup, and/or maintenance procedures with 
required support equipment. 

For Expert Drivers Only.

 This product is capable of extreme speed 

and acceleration! It carries our highest skill level rating and is intended 
for expert drivers only. Experience with nitro-powered radio controlled 
models is required!

 Previous experience with radio controlled models is recommended.
Model requires a higher level of setup, maintenance, or support equipment.

BELOW TEXT HAS BEEN UPDATED on 3-14-07
Kent wants maintenance text to be at the END of the paragraph.-- KB

• Always unplug the battery from the electronic speed control when the model 

is not in use and when it is being stored or transported.

• Allow the battery pack to cool off between runs (before charging).
• Children should have responsible adult supervision when charging and 

handling batteries.

• Do not use battery packs that have been damaged in any way.
• Do not use battery packs that have damaged wiring, exposed wiring, or a 

damaged connector.

• Do not short-circuit the battery pack. This may cause burns and severe damage 

to the battery pack.

• Do not burn or puncture the batteries. Toxic materials could be released. If eye 

or skin contact occurs, flush with water.

• Store the battery pack in a dry location, away from heat sources and direct sunlight.
• Nickel Metal Hydride batteries must be recycled or disposed of properly.

Recycling Your Traxxas Power Cell NiMH Battery

Traxxas strongly encourages you to recycle your Power Cell NiMH battery when 
it has reached the end of its useful life. 

Do not throw your battery in the trash

All Power Cell NiMH battery packs display the RBRC (Rechargeable Battery 
Recycling Corporation) icon, indicating they are recyclable. To find a recycling 
center near you, ask your local hobby dealer or visit www.call2recycle.org.

Speed Control

Your model’s electronic speed control (ESC) is an extremely powerful 
electronic device capable of delivering high current. Please closely follow these 
precautions to prevent damage to the speed control or other components.
•  Disconnect the Batteries: Always disconnect the batteries from the speed 

control when not in use. 

•  Transmitter on First: Switch on your transmitter first before switching on the 

speed control to prevent runaways and erratic performance.

•  Always adhere to the minimum 

and maximum limitations of the 
ESC as stated in the specifications 
table. 

Do not mix battery types 

and capacities. Use the same 
voltage and capacity for both 
batteries. Using mismatched 
battery packs could damage the 
batteries and electronic speed 
control.

•  Insulate the Wires: Always insulate exposed or damaged wiring with heat 

shrink tubing to prevent short circuits

•  Don’t Get Burned: The ESC and motor can become extremely hot during use, 

so be careful not to touch them until they cool. Supply adequate airflow for 
cooling.

•  Use the Factory-Installed Connectors: Do not change the battery and motor 

connectors. Improper wiring can cause fire or damage to the ESC. Please note 
that modified speed controls can be subject to a rewiring fee when returned 
for service.

•  No Reverse Voltage: The speed control is not protected against reverse 

polarity voltage. 

•  No Schottky Diodes: External Schottky diodes are not compatible with 

reversing speed controls. Using a Schottky diode with the ESC will damage 
the ESC and void the 30-day warranty.

LiPo Batteries

Lithium Polymer (LiPo) batteries are becoming popular for use in  R/C models 
due to their compact size, high energy density, and high-current output; 
however, these types of batteries require special care and handling procedures 
for long life and safe operation. 

WARNING: LiPo batteries are intended only for 

advanced users that are educated on the risks associated with LiPo battery 
use. Traxxas does not recommend that anyone under the age of 14 use or 
handle LiPo battery packs without the supervision of a knowledgeable and 
responsible adult.

Your model is able to use LiPo batteries with nominal voltage not to exceed 11.1 
volts (3S packs). LiPo batteries have a minimum safe discharge voltage threshold 
that should not be exceeded. The MXL-6s electronic speed control is equipped 
with built-in Low-Voltage Detection that alerts the driver when LiPo batteries 
have reached their minimum voltage (discharge) threshold. 

It is the driver’s 

responsibility to stop immediately to prevent the battery pack from being 
discharged below its safe minimum threshold.

Low-Voltage Detection on the speed control is just one part of a comprehensive 
plan for safe LiPo battery use.

 It is critical for you, the user, to follow all 

other instructions supplied by the battery manufacturer and the charger 
manufacturer for proper charging, use, and storage of LiPo batteries. Make 
sure you understand how to use your LiPo batteries.

 Be aware that Traxxas 

shall not be liable for any special, indirect, incidental, or consequential damages 
arising out of the installation and/or use of LiPo batteries in Traxxas models. 

If 

you have questions about LiPo battery usage, please consult with your local 
hobby dealer or contact the battery manufacturer. 

As a reminder, all batteries 

should be recycled at the end of their useful life.

1500

3600

Do not mix battery 

capacities. Use two 

batteries with the  

same capacity. 

1500

3600

Do not use a 6-cell 7.2V 

battery in combination 

with a 7-cell battery 

8.4V pack.

Summary of Contents for 56086-4







































Reviews: