NITRO RUSTLER • 7
qUIck STaRT: GETTING UP TO SPEEd
The following guide is an overview of the procedures for getting your model running. Look for the Quick Start logo on the bottom
corners of Quick Start pages.
1. Read the safety precautions on page 4
10. Range test the radio system • See page 12
For your own safety, understand where carelessness and misuse
could lead to personal injury.
Follow this procedure to make sure your radio system works properly at
a distance and that there is no interference from outside sources.
2. Charge the EZ-Start battery pack • See page 22
11. Fill the fuel tank • See page 19
The EZ-Start requires a fully charged battery pack (included).
Use a fuel-dispensing bottle to fill the tank.
3. Detail the body • See page 9
12. Connect the EZ-Start to the model • See page 23
The Nitro Rustler body comes with most decals already applied. If you
wish to add more decals, do it now before you break-in your engine.
Learn the proper way to use the EZ-Start electric starting system
4. Install the antenna - See page 13
13. Start the engine • See page 24
The receiver antenna and antenna tube must be properly installed
before operating your model.
Learn to use the correct starting procedure for your TRX 2.5.
5. Install batteries in the transmitter • See page 10
14. Break-in your engine • See pages 24-26
Nitro Rustler requires 4 AA alkaline or rechargeable batteries
for the transmitter.
Follow the break-in instructions exactly to ensure the
best-performing, longest-lasting engine.
6. Install batteries in the model • See page 10
15. Tune your engine • See page 27
The Nitro Rustler requires 4 AA alkaline or rechargeable batteries for
the receiver.
Learn how to set the fuel mixture needles for optimum
engine performance.
7. Install the EZ-Start battery • See page 22
16. Drive your Nitro Rustler • See page 30
Install and connect the charged battery pack in the EZ-Start controller.
Driving tips and adjustments for your Nitro Rustler.
8. Turn on the radio system • See page 10
17. Maintaining your model • See pages 32
Make a habit of turning the transmitter on first and off last.
Follow these critical steps to maintain the performance of your
Nitro Rustler and keep it in excellent running condition.
9. Check servo operation • See page 12
Make sure the throttle, shifting, and steering servos are
working correctly.
The Quick Start Guide is
not intended to replace the
full operating instructions
available in this manual.
Please read this entire
manual for complete
instructions on the proper
use and maintenance of
your model.
Look for the Quick Start
logo at the bottom of
Quick Start pages.
